Black Curtain Rods

Home ⟩ Curtain ⟩ Black Curtain Rods

By Clovis Cerf. Curtain. Published at Saturday, November 16th, 2019 - 00:36:59 AM.

The opposite applies if we are able to use lighting to our advantage, we could create a sense of warmth and intimacy as well as bring a certain energy and mood to a particular area, particularly in the bedroom or living room. Light is diffused through sheer/light fabrics and we can therefore use this principle to create a wonderful ambiance within a room.
If you do not measure your windows and just guess you may end up with the made-to-measure curtains either being too large or too small and you certainly don't want that! they must fit properly so take the time to get accurate measurements of your windows and then you will have no problems!
Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius.
Curtain tracking can be attached to solid or false/drop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole. As a screw is inserted into the anchor; the anchor expands and grabs firmly to the ceiling. Drop down/false ceilings require clips which are attached to the ceiling grid. There is a hole tapped into each clip that accepts a screw from the curtain tracking. These clips should be placed every 30".